Products
If the product is exposed to weathering or a chemical atmosphere, then a transparent covering will need to be applied by customer. If you are not finding your plate here, please click on our Custom Pate/Tag option and complete the information needed.
Field Markable - Disclaimer
Per ASME A17.1 - Safety Code for Elevators and Escalators: Section 8.13.1.1 All lettering and figures required by Code shall either (a) be engraved, etched, or cast such that the letters and figures shall remain permanently and readily legible
Again, these Field Markable Plates/Tags are the responsibility of the customer to follow/meet code to complete.
Inspection Tag
Metal tags required by code for acceptance and periodic inspections.
Single Year Alteration Plate
Code Data Plates for alterations or modernizations.
Blank - Single Alteration Plate
Alteration Plates that can be completed onsite.
Multiple Year Alteration Plate
Code Data Plates for alterations or modernizations.
Door Operator Plate
Plates mounted on the floor operator indicating minimum closing time.
Temperature and Humidity Plate
Plates designed to assist in meeting the posting of machine room ambient air requirements.
Runby Plate
Plates designed to meet the requirement to identify counterweight runby measurement.
Standard Plate
Code Data Plates for new or existing installations which have not been altered or modernized.
ID Plate
Crosshead Data Plate
Plates are job specific and required of all new installations and also required when any of the required information changes due to an alteration.
Door Lock Monitoring
NYC Elev ID#
Variance Tag
Brake Plate
Plates are required by several sections of the code to provide information for maintenance, inspection, and testing.
Capacity Plate
These are normally part of an installation, but if damaged or missing can be custom made for a specified capacity.
Governor Plate
Plates are required on all governors to provide specific information for use in testing and in governor rope maintenance and replacement.
Working Pressure Plate
These are normally part of an installation, but if damaged or missing can be custom made for a specified pressure.
MCP Location Plate
Plates are required with all MCPs to provide specific information for contact and location of MCP.
Custom Plate/Tag
Written Maintenance Control Program
Fillable PDF to address code requirements for a maintenance control program.
3 Way Gov Pull-Through Test
Size: 3.5" x 1.75"
Firefighters' Operation
Size: 3" x 1.75"
Hydraulic Pressures
Size: 3" x 2"
3 Way Relief Valve Test
Size: 3.5" x 1.75"
Jack Plate
Hydraulic Elevators require the jack to be permanently and legibly marked. This marking must be visible at time of installation.
Rope Resocketing
Size: 4" x 2"
Code Data Plate (ASME A17.1)
Size: 4" x 3"
A18 & NYC Periodic Test
Size: 4" x 2"
Safety Plate
Plates are required for all types of safeties. These are normally provided by the manufacturer but need to be replaced if lost or damaged.
Governor Pull Through
Size: 3.5" x 2"
Rail Lubrication
Size: 5" x 2.5"
SIL Rated Devices
Size: 5" x 2.5"
Hydro Full Load Bypass PSI
Size: 4" x 2"
Rail Do Not Lubricate
Size: 5" x 2.5"
Governor Test
Size: 4" x 3"
Governor Safety
Size: 4.5" x 3"
Cable
Size: 4.5" x 4"
FMP
Size: 5" x 2.5"
Rope
Size: 5" x 3"
Hydraulic Test
Size: 3.5" x 1.75"
Buffer Plate
Plates are required to provide specific information about the load and other characteristics of Spring and Oil Buffers.
Annual 5 Year
Size: 4" x 2"
Gross Load
Size: 3" x 1"
Inspection-Test Standards
Size: 3" x 1"
Mandated Inspection
Size: 3" x 1.25"
Permit Number
Size: 4" x 2"
Rated Load-Speed
Size: 8" x 1.5"