|
||||||||||||||
Code Compliance The Safety Code for Elevators and Escalators (ASME A17.1) requires that all elevators and escalators are to be equipped with a code data plate. The specifics of this requirement are found in Section 8.9 of the 2000 and later editions of the code to be used for inspections and tests. The requirement applies to all new, modernized and existing elevators, escalators, moving walks, dumbwaiters and material lifts. The requirements for code data plates became a part of the code in 1996. The Code Data Plate provides specific code information for the elevator inspector to reference the proper code under which the equipment was installed and/or modernized. Alterations must be specific and reference the proper requirements in Section 8.7. Plates manufactured by CodeDataPlate.com are designed to meet these code requirements. In addition to Code Data Plates we also provide inspection tags, crosshead plates and many other products that are specific to the code. A jurisdictional database has been developed by CodeDataPlate.com to allow us to provide accurate code information to our customers in the form of required data plates, tags and signs.
What's New Periodic Inspection Tags Updated The ASME A17.1-2016 code became effective May 30, 2017 and is adopted immediately by several jurisdictions. We have revised the periodic tags to include the 2016 requirements, but they remain applicable for inspections under earlier editions of the code. In 2017 CodeDataPlate.com added Smart Elevator Tech, LLC as West Coast Distributor and Marketing Partner. Smart Elevator Tech provides engineering solutions with unique products such as the Retracta Ladder®. Complete information is available by clicking on the link. CodeDataPlate.com has acquired the rights to the Written Maintenance Control Program effective immediately. The links to the product description and the website are found on both this page and the Products page. Product News
Since 2008 CodeDataPlate.com has provided inspection tags in accordance with the latest requirements of 8.11.1.6 of the A17.1 Code. These tags are available in Category 1 and 5 for Traction and Hydraulic Elevators and for Escalators and Moving Walks. These tags have now been added to our Products pages. These products, including all company templates, have been updated in 2010 and again in 2012 to reflect the A17.1a-2008, A17.1b-2009 and A17.1-2010 changes in testing requirements. In 2011 Special Appendix K Compliant Periodic Inspection Tags and Rope Resocketing Tags were added for our NYC customers. We now also offer special Acceptance Tags for the tests specified for New Installations and for Alterations in Section 8.10 of A17.1 and these will also meet the Acceptance Tag requirements of the 2013 code.
|